ptairsoft.org
[PT] Airsoft


[NOTICIAS] M2HB replica with BB mechanism & simfire

PTAirsoft

  • Administrator
  • [PT]Airsoft - Member
  • *****
    • Mensagens: 3140
    • Ver Perfil
em: Fevereiro 27, 2012, 00:00:23 am
M2HB replica with BB mechanism & simfire
26 February 2012, 9:12 pm

 M2HB replica with BB mechanism & simfire:

Robin has recently completed a M2HB replica with BB mechanism and simfire, he has sent over some details of his project as well as a couple of videos:

Hi, My name is Robin, 26 years old from Sweden. I just want to share my latest creation to raise the sense of reality in MILSIM.

Back in 2010 I decided to build a couple of M2HB to mount on the vehicles in the TF. I also built the MK93 mount for them.



The first complete M2HB had a M249 PGC box inside and shot 6mm BBs. Here is a few pictures and a short description of the build: http://www.airsoftsverige.com/V6/viewtopic.php?f=26&t=109566&hilit=m2hb

A year ago I was thinking of how I could make this .50 cal a bit louder than the sewing machine AEG it was. I experimented with a gunpowder powered bolt gun but the bang wasn´t that loud as I wanted.

A GBB drop in kit wasn´t loud enough either.

Then I found these reenactment forums and I discovered the SIMFIRE guns which is pretty common. Basically it´s two solenoids, a spark plug and an ignition coil controlled buy a circuit board. Two gases, propane and oxygen, is blended in a combustion chamber and is ignitable by the spark plug creating a loud bang and a muzzle flash.

Recently I fired the gun for the first time and I was amazed what a loud bang it really was. The gun was used on a milsim in Sweden (A Pandion and Tier1 teamwork) a week ago and people could easily hear the gun 5km (about 3 miles) through the deep forest. It was really appreciated.

Here is some pictures of the build:

http://www.airsoftsverige.com/V6/viewtopic.php?f=26&t=129630&hilit=m2hb



Take care and have fun out there! Best regards Robin



Source: [PT]Airsoft - News

[PT]Airsoft News