ptairsoft.org
[PT] Airsoft


Slap Charges

samuka619

  • [PT]Airsoft - Member
  • *
    • Mensagens: 181
    • Ver Perfil
em: Maio 05, 2021, 10:19:26 am
*How to make cheap and easy Slap Charges*
Recently we got a lot questions about the Slap Charges, how we got them where we got them from and how to make them. So here is a quick DIY tutorial on how to make Slap Charges.
Materials:
Cardboard, cord, tape (black), pencil, knife & ruler.
1. First of all draw lines around 45x2,5cm on the cardboard, you will need 4/5 lines for 1 slap charge.
2. Cut all the parts apart and make a pile of it.
3. When you have a pile of 4/5 layers you can tape them together.
4. You can stick a part of the cord in the middle of the pile
5. Make sure that the cord is around 9cm and then make a knot at the end of the cord. So it wil stick out of the pile of cardboard layers around 6/7cm.
6. After you have the right length of the cord you can tape it solid to the cardboard so it won't fall out.
7. When you have the cardboard layers with the cord ready you can start taping the cardboard layers. When you taped the hole cardboard it is time to crush the edges with a hamer or slam it on the floor.
8. Now your Slap Charge is done. If you want, you can attach some double-sided tape on one side of the Slap Charge.
Hope we helped some of the guys out who asked about it!

1. First of all draw lines around 45x2,5cm on the cardboard, you will need 4 lines for 1 slap charge.


2. Cut all the parts apart and make a pile of it.


3. When you have a pile of 4 layers you can tape them together.


4. You can stick a part of the cord in the middle of the pile


5. Make sure that the cord is around 9cm and then make a knot at the end of the cord. So it wil stick out of the pile of cardboard layers around 6/7cm.




6. After you have the right length of the cord you can tape it solid to the cardboard so it won't fall out.
how to upload images to the internet

7. When you have the cardboard layers with the cord ready you can start taping the cardboard layers. When you taped the hole cardboard it is time to crush the edges with a hamer or slam it on the floor.


8. Now your Slap Charge is done. If you want, you can attach some double-sided tape on one side of the Slap Charge.